Supplies
1/4 inch wratchet
6 inch 1/4 inch extension
Optional 1/4 inch swivel
8mm 1/4 inch socket
Magnetic pick up tool
6 inch 1/4 inch extension
Optional 1/4 inch swivel
8mm 1/4 inch socket
Magnetic pick up tool
Step 1
Locate the 4 8mm screws holding in the headlight. There are two in the open.
Another in this hole to the right of the hood latch. [circular]
And another in this oblong hole.
Step 2
Remove all 4 screws with the 8mm socket/ wratchet extension. You need to grab the screw in the hidden holes with a magnet tool to remove and install them.
Step 3
Disconnect the turn signal, Low and high beam connectors.
Step 4
Remove the head light housing. Put in new light.