Supplies
Door pulls:
Schwarz Left Non-Extended Leather [51418398733]
Schwarz Right Non-Extended Leather [51418398734]
Beige Left Non-Extended Leather [51418398735]
Beige Right Non-Extended Leather [51418398736]
Schwarz Left Extended Leather [51418401173] this is the one I used
Schwarz Right Extended Leather [51418401174]
Beige Left Extended Leather [51418401175]
Beige Right Extended Leather [51418401176]
Phillips Headed Screw Driver
Flat Headed Screw Driver
T20 Torx Wrench
Trim tool
Optional: New Door Panel Clips [51411973500]
>door handle part numbers<
Schwarz Left Non-Extended Leather [51418398733]
Schwarz Right Non-Extended Leather [51418398734]
Beige Left Non-Extended Leather [51418398735]
Beige Right Non-Extended Leather [51418398736]
Schwarz Left Extended Leather [51418401173] this is the one I used
Schwarz Right Extended Leather [51418401174]
Beige Left Extended Leather [51418401175]
Beige Right Extended Leather [51418401176]
Phillips Headed Screw Driver
Flat Headed Screw Driver
T20 Torx Wrench
Trim tool
Optional: New Door Panel Clips [51411973500]
>door handle part numbers<
Step 1
Remove the Mirror Switch or Plastic cover with a flat headed screw driver to reveal a Screw.
Step 2
Remove the Screw holding the door handle to the door. [Mine was missing because it broke]
Step 3
Disconnect the Mirror Control Button by pulling it apart from the connector.
Step 4
Remove the door handle cover. [Go here for help]
Step 5
Pop all of the door clips by prying away from the door using either a screw driver or trim tool. There are 6 clips along the bottom of the door.
Step 6
Once clips are removed, pull the door card above the lock switch. then you can lift the door card completely off.
Step 7
Disconnect the 2 Speaker Wires.
Step 8
There are 2 T20 Torx screws holding the other half of the handle on, Remove them. When i reinstalled mine i reinforced it with more screws due to the handle breaking this piece.
Step 9
Reinstall everything.