The Video
The Write-up
20 Pin diagnostic port
Pin 7 is for the oil service and inspection and Pin 19 is the ground.
Turn off the car.
Go under the hood and put the piece of wire in pin 7 and 19 bridging them together.
Turn the key to position 2.
Wait a little over 3 seconds for the oil service to be reset.
Wait 11 seconds for the service interval and oil service to be reset.
Pull the wire after specified time with ignition still on.
Turn off the car.
Go under the hood and put the piece of wire in pin 7 and 19 bridging them together.
Turn the key to position 2.
Wait a little over 3 seconds for the oil service to be reset.
Wait 11 seconds for the service interval and oil service to be reset.
Pull the wire after specified time with ignition still on.
