Supplies
T25 Torx Bit
T15 Torx Bit
Trim tool
Flat Headed Screw Driver
NOTE: This is the way to do it if your mirrors are seized in place and will not turn.
T15 Torx Bit
Trim tool
Flat Headed Screw Driver
NOTE: This is the way to do it if your mirrors are seized in place and will not turn.
Step 1
Remove door panel using a trim removal tool.
Step 2
Disconnect the mirror connector if you have heated or power mirrors. Remove white clip holding wire loom.
Step 3
Tilt mirror glass back and stick a screw driver in to pop off the 2 bottom clips holding on the glass. than pop the rest of the mirror off gently.
Step 4
Remove the 4 T15 Screws, then remove the rear and front mirror cover.
Step 5
With the 2 T25 mounting screws exposed you can remove the mirror assembly from the car.