Supplies
4x Bosch Copper Super+ Spark Plugs [7402] or 4x NGK Standard Copper Spark Plugs [2288]
5/8 Magnetic Spark Plug Socket
3/8 Socket Wrench with Long Extension
Flat Head Screw Driver
Anti-Seize Compound
Boot Protector (Di-Electric Grease)
Shop Towels
5/8 Magnetic Spark Plug Socket
3/8 Socket Wrench with Long Extension
Flat Head Screw Driver
Anti-Seize Compound
Boot Protector (Di-Electric Grease)
Shop Towels
Step 1
Use a flat head screw driver to take off cover [Turn until Vertical].
Step 2
Remove cover to expose plug wires.
Step 3
Take blue tool and use it to pull plug boots.
Step 4
Insert Wrench with extension and Spark Plug Socket into Plug well, turn to the left until plug is loose and remove.
Step 5
Get a new plug and apply anti-seize to it, Wipe out Plug Tubes with a towel, install plug [turning until hand tight].
Step 6
Apply Boot protector to Spark Plug Boot.
Step 7
Apply Di-electric Grease to boot, re-insert plug boots in proper order, it will look like this when done.